Return Line Filters for Construction Equipment

Hydraulic return line filters as tank-mounted, in-tank and in-line filters

• Tank-mounted return filters: filter units installed on top of the hydraulic tank
• In-tank return filters: return filters integrated directly inside the tank
• In-line return filters: filters installed in the return line at defined positions
• Return-suction filters: combined designs for specific system configurations

The installation position between hydraulic system and tank is decisive. Tank-mounted, in-tank and in-line return filters differ in design, integration and application.

Return line filters by reference number, installation position and size

Return line filters are identified by reference number, installation position and size and must match the existing return system.

Visually similar filters often differ in size, connections, internal design or configuration and are not automatically interchangeable.

Flow rate and filter sizing in the return line

The maximum return flow rate is the key parameter. Depending on the system, it can exceed the pump delivery rate.

Incorrect sizing leads to increased back pressure, insufficient return flow or disturbances in the tank return circuit.

Return line filters at the hydraulic tank and reservoir connection

Return line filters are directly linked to the hydraulic tank and the return flow into the reservoir. Depending on the design, they operate as tank-mounted, in-tank or in-line filters.

System-dependent configurations may include additional functions such as ventilation, indicators or integrated components for tank connection.

Matching elements and accessories for return line filters

Return line filters are directly related to hydraulic filter elements for the respective return filter assembly.

Related components are available in the hydraulic filter accessories category, including maintenance indicators and sight glasses.

Selection criteria for return line filters

• Reference number: exact identification of the existing return filter
• Installation position: tank-mounted, in-tank, in-line or combined design
• Flow rate / size: matched to the system return flow
• Design and connections: compatible with the existing return line setup
• Tank integration: matched to the return flow into the reservoir

Check before ordering

• Reference number of the existing return filter
• Installation position: tank-mounted, in-tank or in-line
• Flow rate / size
• Design and connection type
• Tank and return line configuration of the system

Return line filters within the hydraulic system

Return line filters are part of the category hydraulic filters for construction equipment and operate in the return line between the hydraulic system and the tank. Correct selection depends on system compatibility, tank integration and the required return flow rate.

Technical support