Digging Buckets for Mini Excavators 1.0–6.0 t
Digging buckets for mini excavators from 1.0 to 6.0 t are selected according to the excavator weight class, the existing mounting system and the required bucket width. Depending on the weight class, the current LIS® range includes digging buckets with a Symlock adapter SY01 suitable for MS01 or a Symlock adapter SY03 suitable for MS03, as well as versions for CW05 and CW10. Available bucket widths range from 200 to 1,000 mm.
📞 +49 (0)2241 26 56 700
Select digging buckets for mini excavators by excavator class and mounting system
To select a digging bucket, the excavator class, mounting system and required bucket width must be considered together. The following overview shows the combinations and size ranges offered in this category.
| Excavator class | Mounting system | Bucket width | Bucket capacity* |
|---|---|---|---|
| Digging buckets 1.0–1.5 t | Symlock SY01 suitable for MS01 CW05 |
200–600 mm (20–60 cm) | approx. 19–69 L |
| Digging buckets 1.6–2.5 t | Symlock SY01 suitable for MS01 Symlock SY03 suitable for MS03 CW05 |
200–800 mm (20–80 cm) | approx. 26–134 L |
| Digging buckets 2.6–3.5 t | Symlock SY03 suitable for MS03 CW05 |
300–800 mm (30–80 cm) | approx. 55–179 L |
| Digging buckets 3.6–4.9 t | Symlock SY03 suitable for MS03 CW10 |
300–800 mm (30–80 cm) | approx. 71–227 L |
| Digging buckets 5.0–6.0 t | Symlock SY03 suitable for MS03 CW10 |
300–1,000 mm (30–100 cm) | approx. 79–326 L |
* Bucket capacity as stated in the stored product data based on SAE J296. The specifications stated for the individual product are authoritative.
How to select the correct configuration
1. Determine the excavator class
The excavator weight class narrows down the available digging buckets, but does not by itself confirm technical compatibility. The current LIS® range is divided into the classes 1.0–1.5 t, 1.6–2.5 t, 2.6–3.5 t, 3.6–4.9 t and 5.0–6.0 t. The mounting system and bucket width must then be checked.
2. Check the mounting system
For digging buckets with Symlock, the adapter version is decisive: SY01 is suitable for MS01, SY03 for MS03. For mini excavators with a CW mounting system, digging buckets for CW05 or CW10 are available depending on the excavator class. The version stated for the individual product is authoritative.
3. Select bucket width and capacity
Available bucket widths vary by excavator class and mounting system. The specific ranges are shown in the overview above. Bucket capacity is specific to each configuration and is stated on the individual product page.
Symlock adapters: SY01 suitable for MS01, SY03 suitable for MS03
A Symlock adapter has two symmetrically arranged coupling shafts. This allows the digging bucket to be mounted on the matching quick coupler in its conventional working orientation or rotated by 180°. The rotated position enables shovel-bucket use.
For selection, the adapter and quick coupler must be distinguished: MS01 and MS03 designate the respective quick coupler, while SY01 and SY03 designate the symmetrical adapter version on the digging bucket. A digging bucket with SY01 is suitable for MS01; a digging bucket with SY03 is suitable for MS03.
Related quick couplers and tilt couplers are available in the corresponding LIS® category.
Digging buckets for earthmoving and excavation
Digging buckets are used for typical excavation and earthmoving work with mini excavators. The suitable width and configuration depend on factors including the machine, mounting system and intended task. The technical specifications stated for the individual product are authoritative for selection.
SF100 fork tooth for suitably equipped digging buckets
The LIS® SF100 fork tooth is used on suitably equipped digging buckets in this series. The tooth fitted to a specific configuration is stated on the individual product page.
Related excavator buckets and mounting systems
Other bucket types are available in the main excavator buckets category. For grading, levelling and clean-up work, see our ditch-cleaning and grading buckets for mini excavators. For narrow excavation and cable trenches, see our micro-trenching and cable buckets for mini excavators.
For larger excavators from 14 to 30 t, see our digging buckets for excavators 14–30 t. For a custom configuration, the LIS® BucKIT Bucket Configurator is also available.
Technical advice for bucket selection
If the excavator class, mounting system or required configuration is unclear, we can assist with the selection. For this, please provide the machine manufacturer, model and designation of the existing quick coupler whenever possible.
📞 +49 (0)2241 26 56 700
Notice: Brand, system and type designations are used solely to identify compatibility. Their use does not imply affiliation with the respective manufacturer or that LIS® products are original parts. The specifications stated for the individual product are authoritative for selection and technical identification.